LM35的詳細介紹

#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include

//this example reads data from a lm35dz sensor, convert value to degree Celsius
//and then post it to yeelink.net

//replace 2633 3539 with ur device id and sensor id
yl_device ardu(360847);  //此處替換為你的設備編號
yl_sensor therm(411832, &ardu);//此處替換為你的傳感器編號
//replace first param value with ur u-apikey
yl_w5100_client client;
yl_messenger messenger(&client, "a02aa5452fe546dc5b866531873b5d0f", "api.yeelink.net");   //此處替換為你自己的API KEY

const int THERM_PIN  = A0;

float lm35_convertor(int analog_num)
{
  return analog_num * (5.0 / 1024.0 * 100);
}

void setup()
{
    Serial.begin(9600); //for output information
  byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xAA};
  Ethernet.begin(mac);
}

void loop()
{
  int v = analogRead(THERM_PIN);
        Serial.println(lm35_convertor(v));
    yl_value_data_point dp(lm35_convertor(v));
    therm.single_post(messenger, dp);
    delay(1000);
}